| |
Technical Parameters
| Series |
Max
Torque |
Rotating
Angle |
Operat
-
ing
Time |
Working
Voltage |
Input
Power |
Enclo
-
sure |
Medium
Pressure |
Medium
Temperature |
Ambient
Temperature |
Ambient
Humidity |
| KLD100 |
10N.m |
90° |
about10S |
DC12V
|
18W |
IP67 |
1.6Mpa |
UPVC0-45℃
CPVC0-90℃
|
-20°C<t
<45°C |
≤85%
non-condensing |
| AC/DC24V |
35W |
| AC/DC110V,220V |
25W |
Connecting Size
| DN |
d |
d1 |
d2 |
L |
L1 |
H1 |
H2 |
T |
n-Φe |
W(Kg) |
| S |
T |
F |
S |
T |
F |
S |
T |
F |
S |
T |
F |
| DN15 |
13 |
20.3 |
1/2" |
65 |
45 |
95 |
112 |
130 |
16 |
22.5 |
64.5 |
13 |
4-14 |
0.7 |
1.0 |
| DN20 |
18 |
25.3 |
3/4" |
75 |
55 |
105 |
132 |
150 |
19 |
27.5 |
70 |
14 |
4-14 |
0.8 |
1.1 |
| |
S: Socket T: Thread F: Flange |
Note:
1.JIS, ANSI and GB is available for choose.
2.The data above is for GB standard, and there is difference for different standard.
3.Please contact our sales for other data specification.
Main components
| Parts |
Material |
| Actuator housing |
ABS |
| Coupling |
Die-casting metal |
| Bracket |
PA66 + 33%GF,304 |
| Body |
UPVC,CPVC |
| Ball |
UPVC,CPVC |
| Stem |
UPVC,CPVC |
| Ball seat |
PTFE |
| Seal |
EPDM,FPM,NBR |
Instructions for Manual override
1.Manual override is permitted to use only when power is cut.
2.Press down the center button, and turn it left or right until the valve is in correspond position.
3.Please press down the center button again after manual override usage, and make it work properly
when power is supplied.
Wring: B2, B3, BD3 and B3S are available, please refer KLD 100 Control Mode for details.
*1 DC5V is available.Due to its high workinq current,we do not recommend.But we can accept customization.
|
